Easyseal 1200 (24 NOS/ BOX)

Description

USES

Adheres to Glass, Fiberglass, Ceramic, Non-oily woods, Korean artificial marbles, Porcelain, Most metals, most
plastics & rubbers & most painted surfaces.

SURFACE PREPARATION

Surface should be completely clean, dry & free of contaminants such as dirt, dust, grease, oil & other residue or material that may interfere with adhesion. Remove mildew by scrubbing . Protect eyes & hands by wearing goggles/face shield & chemical resistant gloves. Thoroughly rinse surface & allow to dry completely prior to sealant application.

DIRECTIONS

• Clip off tip of spout at 45 degree angle to desired size.
• Apply using steady, even pressure to completely bridge joints
• Smooth sealant for a neat appearance.
• Wipe away excess with a dry cloth or towel before surface skins.
• After cure, carefully remove with a razor blade, taking care not to undercut sealant bond to substrate.

LIMITATIONS

• Sealant not paintable. Complete all painting prior to sealant application.
• Not recommended for full-time water immersion applications.
• Not recommended for application in totally confined areas as atmospheric moisture is required for sealant cure.
• Sealant does not adhere well to Teflon coated materials, Polyethylene, Polypropylene or Methyl methacrylate (Plexiglas).
• Not recommended for use on Polycarbonate.
• Not for use on or near sensitive metals such as Copper, Brass, Zinc, Carbon Steel, Galvanized Iron or Magnesium as
  corrosion may occur during sealant’s acetic acid release.